Smart Test Solutions - Smart All The Way!

CONCRETE INVESTIGATIONS & SURVEYS

CONCRETE INVESTIGATIONS & SURVEYS
SMART Test Solutions Limited carried out the above for a client recently.
This one was done 100% correctly from a planning, safety, and site point of view, with early involvement with the client from the planning stage.
Initial discussions and planning were followed up with a full site walk though and mark out with all items marked up as per agreed references with the client’s representatives engineers.
Full safety protocols were adopted and dealt with prior to going onto the site, and while on site at all times.

undefinedundefinedundefinedundefined
Testing included the following,
• Rebar location and rebar cover, both on the slab and on the soffit.
• Slab thickness.
• Localized breakout to record physical bar, type, condition, size, and physical concrete cover readings.
• Chloride Profiles.
• Concrete Coring, being very careful to avoid hitting rebar, which we did successfully on all occasions.
• Lab testing included, core compressive strength, core carbonation, chloride content, sulphate content.
All scanning equipment was in calibration and site calibrated also in front of the client and a repeatability survey was carried out and 100% location accuracy was found.
Surveys were carried out to the client’s satisfaction, with more areas covered after the client requested some more on-site, and the report was issued on time.
For an accurate, productive, responsible, responsive rebar location and cover survey be “””SMART””” and contact Michael Robinson at 0858442888 or smarttesting2018@gmail.com and check out our latest projects on www.smarttestaudit.ie

CONSTRUCTION PRODUCTS CE MARKING

Further CE Marking success for SMART Test Solutions and its valued customers.
EN 771 Concrete Blocks, EN 206 Ready-mix Concrete, EN 12620 Concrete Aggregates, EN 13242 Under Floor Fill and EN 13139 Mortar & Plastering Sand.
undefinedundefinedundefinedundefinedundefinedThe customers demonstrated quality and commitment from the word go, even to the point of doing more than is required to ensure the highest quality products.
The products are of very high quality, the quality systems tailored by ourselves, cost effective and specific testing and the audits went very well.
When you need construction materials advise and construction products CE Marking, Be “””SMART””” contact Michael Robinson on 0858442888 and smarttesting2018@gmail.com and check out our website for the latest news on www.smarttestaudit.ie

CONCRETE INVESTIGATIONS & SURVEYS

SMART Test Solutions Ltd carried out the above for a client recently.
This one was done 100% correctly from a planning, and site point of view, with early involvement with the client from the concept stage.
Initial discussions and planning were followed up with a full site walk though and mark out with all items marked up as per agreed references with the client’s representative’s engineer.
The overseeing engineer was second to none, kept involved, very experienced, very professional, and most importantly very helpful.
undefinedundefinedundefinedundefinedFull safety protocols were adopted and dealt with prior to going onto the site, and while on-site at all times.
Testing included the following,
• Rebar location and rebar cover, on walls, beams, slabs and soffits.
• Slab thickness measurements.
• Localized breakout to record physical bar, type, condition, size and physical concrete cover readings.
• Rebar assessments.
• Concrete Coring, being very careful to avoid hitting rebar, which we did successfully on all occasions.
• Proceq Resipod Surveys.
• Lab testing included, core compressive strength, core carbonation, chloride content, sulphate content.
• IS 398 Under floor Fill Investigations.
• IS 465 Concrete Block Investigations.
• Extra client survey requests while on site carried out with no problem.
• Report presented in a totally new format which the experienced engineer commented that it was the best-presented report he had seen, easy to navigate, and easy to find particular results,and this report was linked to the location survey carried out on site.

All equipment was in calibration and site calibrated also in front of the client and a Hilti Ferroscan repeatability survey was carried out and 100% location accuracy was found.
Surveys were carried out to the client’s satisfaction, with more areas covered after the client requested some more on site, and the report was issued on time and the proof of a successful project was the award of immediate repeat work from the same client.

QUALITY VALUE ENHANCED CERTIFIED SITE FIXING PULL-OUT TESTING

SMART Test Solutions Ltd Michael Robinson was engaged by a specialized building manufacturer to carry out pull-out tests on one of their sites recently.

undefined
undefinedundefinedAll equipment used was in full calibration and the operator is certified to Construction Fixing Associations Standards, fully independent, and has many years of experience.
Extra tests were requested on the day carried out as well.
Early involvement in this testing project allowed the job to be completed on time.
The summary report was completed within 24 hrs of the testing being completed as promised.
For a dedicated value-enhanced prompt service be SMART and contact Michael Robinson at 0858442888, smarttesting2018@gmail.com,and visit the website on www.smarttestaudit.ie

BARRIER, BALUSTRADE, AND HANDRAIL LOAD TESTING

SMART Test Solutions Ltd was engaged recently to carry out the above testing on site recently.
undefinedundefinedundefinedThis was a small-lead-in-time testing project but our other customers kindly agreed for this testing project to take preference over theirs, as theirs was a lower priority in terms of time etc.
An initial site visit was carried out as part of the service to view safety and testing conditions.
Full safety were protocols adopted and dealt with prior to starting the testing.
Certified calibrated equipment used, all works carried out for the client in a safe accurate considerate manner and the report completed within 24hrs as agreed with the client.
For a safe, accurate, detailed, and responsive barrier, balustrade, and handrail load service be “””SMART””” and contact Michael Robinson on 0858442888 or smarttesting2018@gmail.com and check out our latest projects on www.smarttestaudit.ie

CONSTRUCTION FIXINGS PULL-OUT TESTING SERVICE “A SMART SERVICE”

SMART Test Solutions Ltd was engaged on some different construction sites recently to carry out the above-certified load pull-out testing.
On all sites, full safety protocols were adopted and dealt with prior to starting the testing.
Different certified calibrated equipment was used, all works were carried out for the clients in a safe accurate manner and all of the reports were completed within 24hrs as agreed with the client.
All Construction Fixings were tested to the client’s instructions, and as always some extra ones were tested as part of the service.
All testing is carried out by a trained certified individual with full industry best competency certification and many years of experience.
For a safe, accurate, detailed, and responsive load testing service be “””SMART””” and contact Michael Robinson at 0858442888 or smarttesting2018@gmail.com and check out our latest projects on www.smarttestaudit.ie

undefinedundefinedundefinedundefinedundefinedundefinedundefinedundefined

Newer posts → Home ← Older posts