SMART Test Solutions Ltd’s Michael Robinson was engaged by a specialized building company to carry out-pull out tests on remedial wall ties on their site.
Full safety protocols were observed prior to any testing starting.
All equipment used was in full calibration and the operator is certified to Construction Fixing Associations Standards, fully independent, and has many years of experience.
Extra tests were requested on the day carried out as well.
The report was completed and sent to the client within 24 hours of the testing being completed.
For a dedicated value-enhanced prompt service be SMART and contact Michael Robinson at 0858442888, smarttesting2018@gmail.com, and visit the website on www.smarttestaudit.ie

SMART Test Solutions Limited carried out the above for a client recently.
This one was done 100% correctly from a planning, safety, and site point of view, with early involvement with the client from the planning stage.
Initial discussions and planning were followed up with a full site walk-through and marked out with all items as per agreed references with the client’s representative engineers.
Full safety protocols were adopted and dealt with prior to going onto the site, and while on site at all times.
Testing included the following,
• Rebar location and rebar cover.
• Localized breakout to record physical bar, type, condition, size, and physical concrete cover readings.
• Chloride Profiles.
• Concrete Coring, being very careful to avoid hitting rebar, which we did successfully on all occasions.
• Lab testing included, core compressive strength, cement contents, core carbonation, chloride content, sulphate content.
• 100% accuracy achieved each and every time to avoid rebar for the core compressive tests, the chloride profile tests and to hit but not cut the rebar for the localised break-out tests.
All scanning equipment was in calibration and site calibrated also in front of the client and a repeatability survey was carried out and 100% location accuracy was found.
Surveys were carried out to the client’s satisfaction, with more areas covered after the client requested some more on-site, and the report was issued on time.
For an accurate, productive, responsible, responsive concrete investigation survey rebar location and cover survey be “””SMART””” and contact Michael Robinson at 0858442888 or smarttesting2018@gmail.com and check out our latest projects on www.smarttestaudit.ie

SMART Test Solutions Limited’s Michael Robinson carried out Grab Rail Load tests for various different clients recently.
All elements are agreed in advance with the contractors and the design teams overseeing engineers.
Full safety protocols were observed from start to finish, with great assistance from the contractors on each job.

Full care and attention and procedural adherence during the whole process.
Report and findings presented to the client THE NEXT DAY!!!!!!.
For a dedicated value-enhanced prompt 24hrs CE Marking, auditing & load testing service be SMART and contact Michael Robinson at 0858442888, smarttesting2018@gmail.com, and visit the website on www.smarttestaudit.ie

Further CE Marking success for SMART Test Solutions Limited and its very much valued customers.

• EN 771 Concrete Blocks

• EN 206 Ready-mix Concrete

• EN 12620 Concrete Aggregates

• EN 13242 SR21 Under Floor Fill

• EN 13139 Mortar & Plastering Sand.

The customer’s demonstrated quality and commitment from the word go, even to the point of doing more than is required to ensure the highest quality products.
The products are of very high quality, the quality systems tailored by ourselves, cost-effective and specific testing, and the audits went very well.
When you need construction materials advice and construction products CE Marking, Be “””SMART””” contact Michael Robinson at 0858442888 and smarttesting2018@gmail.com and check out our website for the latest news on www.smarttestaudit.ie

SMART Test Solutions Ltd has carried out site barrier and handrail load testing for different customers, each with its own different setups and requirements.
Each job tested on its own merits and to the overseeing design engineer’s requirements.
At all times full safety protocols are adopted and dealt with prior to starting any of the tests.
Calibrated equipment used, load sequence instructed by the client, and followed and accurate testing carried out. Report completed same day!!!!.
For an accurate barrier and handrail load testing service be “””SMART””” and contact Michael Robinson at 085844288 or smarttesting2018@gmail.com and check out our latest projects on www.smarttestaudit.ie

SMART Test Solutions Limited carried out fixing pull-out tests recently using different calibrated equipment and methods.
Full safety protocols were observed prior to any testing starting. All equipment used was in full calibration and the operator is certified to CFA standards and fully independent.                                  The reports were completed within 24 hrs of the testing being completed.                                      For a dedicated value-enhanced prompt service be SMART and contact Michael Robinson at 0858442888, smarttesting2018@gmail.com ,and visit the website on www.smarttestaudit.ie